S 500 4MATIC (220.184) V8-5.0L (113.966) (2003)
Install
8
Replace rubber spacers
NOTE: Do not remove protective foil
9
Replace rubber channel (2) at bottom of body flange
10
Prepare window for installation
11
Prepare body flange for installation of window
12
Line up rear window in the body opening
-
See "Special Tools" below.
Distance between top edge of rear window and rear edge of roof - Dimension - A" 20 mm
13
Remove protective foil from rubber spacers
14
Open window in driver's door.
CAUTION: During curing time, this prevents the rear window from being pressed outward by the air pressure when the doors are
closed
15
Apply glue
CAUTION: Install window within 10 minutes before adhesive force of glue starts to decrease
NOTE: Height of glue bead approx. 13 mm
-
Betagun 2 K electric cartridge gun
See "Commercially Available Tools" below.
16
Install rear window
-
See "Commercially Available Tools" below.
17
Install molding on rear window
18
Connect electric connections for heated rear window on C-pillar
19
Install paneling on C-pillar
20
Clean rear window
Special Tools
Special Tools
Commercially Available Tools