S 500 Sedan (140.051) V8-5.0L (119.970) (1994)
6.
Remove rub strip (B, Figure 4) by unscrewing six Phillips head screws on left and right ends of bumper.
Using a screwdriver, pry back retaining tabs two at a time starting from the outside. Remove rub strip and foam inserts.
7.
Disconnect bracket by drilling out rivets in side bracket (Figure 5). Unscrew the three front brackets.
Assembly
Installing driving lights
8.
Insert driving lamps into openings provided and secure in place using rivets supplied.
9.
Install front three brackets to AMG air dam/bumper cover. Install left and right side brackets on air dam/bumper cover using bolts, U-washers, and
nuts supplied.