mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Navigation Module > < Keyless Entry Module|Locations|Page 33
Page 1
background image

Keyless Entry Module: Service and Repair

 
2nd version as of 09/95

A pillar trim in bottom of passenger footwell

Remove, install.

Cover with recirculated air filter (2)

Remove, install.

Screw (arrow)

Take off, screw on.

Electric couplings

Disconnect, connect

NOTE:  The 12-pin connector is provided with a plug-in and withdrawal aid. To withdraw, press locking catch and fold over bar.
The 2-pin connector is secured with a lock. To disconnect, press locking catch and push lock to the side.

Control module (N54)

Remove, insert.

 
NOTE:  When replacing the control module or the transmitter key, always quote the locking mechanism number, since these two components are tuned
to each other.
After replacing the control module, perform version coding as stated in diagnosis manual.

Navigation Module > < Keyless Entry Module|Locations|Page 33