S 55 AMG (220.174) V8-5.5L SC (113.991) (2004)
Body Control Module: Service and Repair
AR54.21-P-1261I Remove/Install SAM Control Module With Fuse and Relay Box, Front Right
AR54.21-P-1261I Remove/Install SAM Control Module With Fuse and Relay Box, Front Right
Shown On Model 220
Removing, installing
1
Connect quiescent retention device
2
Disconnect ground cable from battery
3
Open engine hood and position upright
4
Unlock and remove cover on right fuse box (F1.1)
5
Fold up clamping lever (1) of supply (terminal 30) and remove cable
6
Unclip fuse carrier (4) on control module unit (passenger-side SAM control module (N10/7) with right front fuse and relay module (K40/7)).
NOTE:
-
Once the retaining lugs (arrow) have been pressed in the direction of the arrow, the fuse carrier can be taken out from the top
-
The components fitted to the right front fuse and relay module may vary depending on the equipment.
7
Remove the remaining couplings on the front right fuse and relay module
8
Pull out control module unit from above
CAUTION: Only pull out until the couplings (3) on control module unit (right front fuse and relay module (K40/7) and passenger-side
SAM control module (N10/6)) are accessible
9
Unlock and remove couplings (3)
-
If passenger-side SAM control module or right front fuse and relay module are defective: Disconnect SAM control module from fuse and relay
module
10
Install in reverse order.