S 55 AMG (220.174) V8-5.5L SC (113.991) (2004)
Note:
Observe wire color assignment, by following the table!
f)
Position solder connection in center of twisted wires and shrink with heat gun (solder).
Utilize wiring harness repair set 220 589 02 99 00 and heat gun 458-HL1802E via the MBUSA Standard Service Equipment Program.
g)
Check solder connections.
h)
Wrap fabric tape around electrical wires on both sides.
i)
Remove old connector from bracket and install new connector.
j)
Perform the same above steps on coupling in passenger compartment.
Note:
Ensure proper engagement when assembling electrical connector for driver seat ETR or front passenger seat ETR.
k)
Delete fault memory with STAR DIAGNOSIS.
l)
Install in the reverse order.
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair.
In Case of Warranty