S 55 AMG (220.174) V8-5.5L SC (113.991) (2004)
Shown On Model 220 With AIRMATIC Measurement On Rear Axle
Shown On Model Series 220 With 4matic: Measurement On Front Axle
Inspect
1
Prepare for chassis alignment check
2.1 Check vehicle level at the front axle via the spring link inclination
-
Model Series 215, Model Series 220 without 4MATIC
-
Clean test points on track control arm
CAUTION: The wire (086b) to the sensor (086a) must be toward the center of the vehicle to prevent spurious test data from being
generated.
-
Position the test sensor (086a) between the cast supports on the track control arm and store the test data.
-
Measurement point 1 (left front)
-
Measurement point 2 (right front)
2.2 Check vehicle level at front axle via wishbone inclination
-
Model 220 with 4MATIC
-
Clean test points on lower control arm.
CAUTION: The wire (086b) to the sensor (086a) must be toward the center of the vehicle to prevent spurious test data from being
generated.