S 55 AMG (220.174) V8-5.5L SC (113.991) (2004)
Tilt Wheel Motor: Service and Repair
AR46.10-P-0600-06I Remove/Install Height Adjustment Motor Gear Mechanism
AR46.10-P-0600-06I Remove/install height adjustment motor gear mechanism
- with CODE (275) Memory package (driver seat, steering column, mirrors)
Component Identification
Removing
1.1 Model 215, 220: Unclip microswitch connector (a).
2
Remove bolts (60a) from gearing (60). Remove gearing (60) and detach gearing connection piece (60e).
Shown on model 220
Install
3
Insert gearing (60) and slide on gearing connection piece (60e).
4
Install bolts (60a) for gear mechanism (60).
Do not tighten bolts (60a) until the mounting console (87) is mounted on the steering column tube.
5
Check alignment of the two holes (arrows) in the pins. To do this, insert a suitable bolt through the holes and turn the pins to adjust the height if
necessary.
The chamfers of the bolt eyes (arrows) must point outwards.
6.1 Model 215, 220: Clip in microswitch connector (a).