S 600 (220.176) V12-5.5L Turbo (275.960) (2005)
8. Remove template (4) from new headliner (1) and cut hole in new headliner (1) for PTS installation frame (7).
Use metal saw blade.
Saw out within recorded cutting line, otherwise the cutout for the PTS installation frame (7) is too large.
9. Insert PTS installation frame (7) from below into new headliner (1)
10. Bend retaining lugs of PTS installation frame (7) with plastic mallet
Carefully position tool at PTS installation frame (7), otherwise headliner (1) can be soiled or damaged. Thereby support PTS installation frame (7)
with suitable clean object from below, otherwise installation frame (7) can distort
AR68.30-P-4305M Prepare Headliner For Installation
AR68.30-P-4305M Prepare Headliner For Installation
Component Identification
Steps 1.1 - 4
Workshop Equipment
AP68.00-P-1000-01A Clean Dome (Prefabricated Headliner) From Textile Material, Floor Coverings,
Rear Shelf, and Other Textiles