S 600 (220.176) V12-5.5L Turbo (275.960) (2005)
Evaporator Temperature Sensor / Switch: Service and Repair
AR83.50-P-9080M Remove/Install Rear Evaporator Temperature Sensor
AR83.50-P-9080M Remove/Install Rear Evaporator Temperature Sensor
- with CODE (582) Rear air conditioning
1
Remove rear AC control module (N22/4)
2
Remove center console (1)
3
Detach connector at rear air conditioning evaporator temperature sensor (B10/11)
4
Pull rear air conditioning evaporator temperature sensor (B10/11) out of the AC housing
5
Install in the reverse order.
6
Turn on air conditioning and allow engine to idle for about 4 minutes.
NOTE: Set left and right temperature of rear AC control and operating module to "LO" Switch blower over to the maximum setting
7
Check function of air conditioning.
NOTE: Air outlet temperature at the center nozzle shall not fall below + 5 degrees C, and if necessary, carry out diagnosis.