S 600 Sedan (140.057) V12-6.0L (120.982) (1996)
2nd version - Bowden cable
Door liner (1)
lay down with front side on suitable surface.
Nuts (2)
screw off of wooden trimstrip (3) (6 each, WAF 7).
Screw (4)
screw out of interior actuating mechanism (5).
Clip (6)
remove.
Wooden trimstrip (3)
remove from door liner (1).
Interior door actuating mechanism (5)
remove. Pay attention to attachment hooks!
Screw (10)
unscrew from dowel (13).
Bowden cable (11)
remove from interior door panel.
Bowden cable hook (12)
unhook from door lock.
Reinstall in opposite order.
Adjusting Bowden cable
Adjust knurl screw (9) on bracket (8) so that when pulling on the interior actuating mechanism, after opening the rotary latch on the door lock, there is
still 5 mm pull travel on the handle.
NOTE: 2nd Version - Interior Actuating Mechanism With Bowden Cable. After separating the locator for the Bowden cable (arrow) on housing for
interior actuating mechanism, the door panelling can also be used for the 1st version with linkage.