S 600 Sedan (140.057) V12-6.0L (120.982) (1996)
Sunroof / Moonroof Motor: Service and Repair
Control Cable Cannot Be Removed
Mount with Motor and Gear Unit, Removal and Installation:
-
Remove panelling in trunk, left.
-
Press plastic cap (Fig. 1) off.
-
Unscrew screws, hex. nut and pull off plug connection (Fig.2).
-
Turn mount with motor and gear unit, unscrew screws on gear unit cover and remove cover (Fig. 3).
-
Open gear unit cover (Fig. 4). For this purpose unclip retaining clip or tube and remove gear.
-
Pull control cable out of tube toward front and unclip both tubes on gear unit.
-
Remove mount together with motor and gear unit.
-
Assemble gear unit.
NOTE: Clean gear unit housing and lubricate gear with MB-lubricant Paste, part no. 001 989 14 51.
-
Reinstall in opposite order.
CAUTION: When clipping in the two tubes ensure that the bead on the tube is pushed into the groove on the gear unit.
-
Adjust slip clutch. See: Sunroof / Moonroof Clutch/Adjustments