S 600 Sedan (140.057) V12-6.0L (120.982) (1996)
3
Screw out screw (arrow at rear) on finisher (4) and remove finisher toward front.
4
Unscrew terminal strip (5) and handle (6) from cushion frame.
5
Unhook rubber tensioners (arrows) on cushion frame.
6
Expose cable to belt buckle (2 Ohms clips).
7
Screw out screws (arrows).
Tightening torque: 10 Nm.
8
Screw out screws (arrows).
Tightening torque: 10 Nm.