S 600 Sedan (140.057) V12-6.0L (120.982) (1996)
5
Unbolt connection fitting (12a) at power steering pump (12).
Installation: Replace seal.
6
Unscrew bolts (arrows) and take off front covers.
7
Replace shaped rubber gasket and O-ring of coolant passage in front cover.
8
Clean sealing surfaces of front cover of cylinder head and groove of timing case cover.
9
Inspect shaped gaskets (arrows) of cover guide rail bridge (13)for signs of damage and replace if necessary.
10
Apply spots of sealant 002 9897320 10 into the oil-free groove of the timing case cover at the joint to the left and right cylinder head (arrows).
11
Insert new shaped gasket dry (without sealant) into oil-free groove. Coat the top side of the shaped rubber gasket with a little engine oil.
12
Coat front cover with sealant 002 989 73 20 10 at contact surfaces to cylinder head.