S 600 Sedan (140.057) V12-6.0L (120.982) (1996)
1
Shake primer vigorously and apply in gluing area (maximum width 30 mm).
NOTE: Allow primer to air-dry for at least 5 minutes.
Applying Glue
References (WH), Commercially available tools
1
After expiration of the heat-up time remove glue cartridge from cartridge heater, remove bottom of cartridge and puncture diaphragm. Screw on
application nozzle and insert cartridge into cartridge gun.
NOTE: Heat-up time at least 20 minutes.
2
Guide nozzle along adhesive surface or glue residue on body flange while pressing a uniform quantity of glue out of the glue cartridge.
NOTE: Height of glue bead approx. 13 mm.
NOTE: Install windshield within 5 minutes before adhesive force of glue begins to decrease.
Aligning Rear Window In Body Opening
References (BE), Test and adjustment values for rear window
Figure 1
1
Before applying glue align rear window in body opening (observe dimension "A", measured between top of window and rear edge of roof).