mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 14475 > < Procedures|Page 14473
Page 5
background image

7. Contact the black fuse carrier (23) of the backup camera wiring harness (1) as per picture on slot 141 of the rear end SAM control unit with rear

fuse and relay module (N10/2) and equip with 5 amp fuse.
The slot 141 of the rear end SAM control unit with rear fuse and relay module (N10/2) is marked in color and mechanically coded.

8. Fix the line branch off with black 4-pin coupling of the backup camera wiring harness (1) in position with the fixing clips attached to the line

branch off as per picture (see arrows).

9. Route black 4-pin coupling (24) of the backup camera wiring harness (1) in the trunk lid as per picture (6) and fix in position with the fixing clips

attached (see arrows).

10. Install line holder (25) (see enlarged detail).

Procedures|Page 14475 > < Procedures|Page 14473