S 65 AMG (221.179) V12-6.0L Turbo (275.982) (2008)
/v12-6.0l_turbo_(275.982)/Page-2973002.png)
Function requirements
^
Circuit 15 ON
^
Rain/light sensor detects twilight or nigh
^
Active low beam
^
Drive position "R" not engaged
^
Vehicle speed above 15 km/h
Function sequence
The night view assist system is activated by pressing the night view assist button.
The request is read in by the upper control panel control unit via the upper control panel LIN and transmitted by the ESP control unit to the night view
assist control unit via the central gateway control unit.
After enable by the night view assist control unit the multifunction display in the instrument cluster changes speedometer display and the display appears.
Extremely bright picture areas, which could dazzle the driver, are suppressed and thus the driver is able to perceive the other content in the picture (e.g.
obstacles, pedestrians or cyclists). The brightness distribution is processed in the night view assist control unit.
The rain/light sensor detects three brightness levels:
^
Day: Night view assist deactivated (no display)
^
Twilight: Night view assist partially activated (display only)
^
Night: Night view assist system fully activated (display and infrared lamps active)
