mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AH82.25-P-0001-02SX Notes on Installing Rental Vehicle Equipment|Page 14830 > < AH82.25-P-0001-02SX Notes on Installing Rental Vehicle Equipment|Page 14828
Page 3
background image

Component Identification

Driver footwell:

1

Remove drive train CAN voltage distributor connector (X30/21) upwards from air distributor (9c) and place to one side.

2

Remove left interior CAN/FFS [RBA] voltage distributor connector (X30/32) upwards from air distributor (9c) and place to one side.

3

Remove air ducts (9a, 9b).

4

Disconnect electrical connector under air distributor (9c) and remove air distributor (9c).

5

Unlock and open covers of cable ducts (10a).

6

Unlock and remove cable duct cover (10b).

Shown with code (582) Rear air conditioner.

AH82.25-P-0001-02SX Notes on Installing Rental Vehicle Equipment|Page 14830 > < AH82.25-P-0001-02SX Notes on Installing Rental Vehicle Equipment|Page 14828