mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AH82.25-P-0001-02SX Notes on Installing Rental Vehicle Equipment|Page 14850 > < AH82.25-P-0001-02SX Notes on Installing Rental Vehicle Equipment|Page 14848
Page 10
background image

18

Route branch-off line (7a) of rental vehicle wiring harness (7) in the cable duct on the center tunnel as per picture.

The branch-off line (7a) of rental vehicle wiring harness (7) will be routed further into the driver footwell on the center tunnel later on.

19

Route remaining branch-off lines of the front section of rental vehicle wiring harness (7) into the front passenger footwell (see arrow B).

Right rear legroom and front passenger footwell:

20

Contact black, 2-pin coupling with brown (br) and brown/red (br/rt) line of rental vehicle wiring harness (7) in a free slot of the right interior
CAN/FFS [RBA] voltage distributor connector (X30/33).

21

Position orange/gray length comparison markings of brown (br) and brown/red (br/rt) lines so that they exactly cover the orange/gray length
comparison markings on the on-board wiring harnesses (see arrow A) and fix lines in place at onboard wiring harnesses.

22

Connect cable lug of brown ground lines (br) of rental vehicle wiring harness (7) to ground (right front seat crossmember) (W19).

23

Position black/violet length comparison markings of the brown ground lines (br) so that they exactly cover the black/violet length comparison
markings of the on-board wiring harnesses (see arrow B) and fix ground line in place at on-board wiring harnesses.

AH82.25-P-0001-02SX Notes on Installing Rental Vehicle Equipment|Page 14850 > < AH82.25-P-0001-02SX Notes on Installing Rental Vehicle Equipment|Page 14848