S 65 AMG (221.179) V12-6.0L Turbo (275.982) (2008)
Connecting Rod: Service and Repair
AR03.10-P-6111-02L Tightening conrod screws
1 Coat thread and head contact surface of screw with engine oil.
2 ED Apply a preliminary tightening torque to the connecting rod bolts (1 st stage, 2nd stage).
3 Tighten conrod screws with a torquing angle wrench. m If no torquing angle wrench is available, the Conrad screws can be torqued further by the
specified angle in a single operation using a wrench and tommy bar. Do not use a flexi-rod torque wrench for tightening in order to avoid any angle
errors.