S 65 AMG (221.179) V12-6.0L Turbo (275.982) (2008)
Seat Belt Buckle Switch: All Technical Service Bulletins
Restraints - Seat Belt/Head Rest Comfort Feature Inop.
Date: January 9, 2009
Order No.: P-B-91.40/115a
Supersedes: P-B-91.40/115 dated Sept. 13, 2006
Group: 91
Revision History
Revision
Date
Purpose
a
1/9/09
Applicable Models and Damage Code Updated
-
9/13/06
Initial issue
SUBJECT:
Model 221.171/176/177/179/186 (with Option Code 223 or 223+224)
Rear Seat Belt Comfort Fit and/or Head Restraint Raising Mechanism Not Functioning When Fastening Seat Belt
If you receive customer reports in the above model vehicles of the rear seat belt comfort fit and/or head restraint raising mechanism not functioning when
fastening seat belt, the wiring from the buckle may be damaged. To resolve, perform the following procedure.
1.
Remove seat belt buckle. Refer to WIS document AR91.40-P-1516SX.
2.
Secure the wiring on the replacement buckle using fabric tape as shown in (Figure 1).
3.
Install in reverse order.
Note:
The wiring has been secured in production from December 2005.
Note:
Verify part application in EPC by VIN)