S 65 AMG (221.179) V12-6.0L Turbo (275.982) (2008)
Component Identification
1
Before removing the centering sleeve, measure and note the press-in dimension "a".
Depending on the version of flexible disk (for example, on vehicles with vibration damper) it may lead to a deviation between the measured and
the specified press-in dimension "a". Then the measured press-in dimension "a" is to be taken into account before removal.
2
Knock centering sleeve evenly out of propeller shaft (arrow) using a flat chisel.
Component Identification
If the centering sleeve cannot be knocked out using the chisel:
3
Drill a hole (dia. 10 mm) 15 mm from the end face of the centering sleeve (10) at right-angles through the centering sleeve.