S 65 AMG (221.179) V12-6.0L Turbo (275.982) (2008)
Special Tools
Special tool assignment:
Removal and installation tool 140 589 08 43 00
Extraction and insertion tool 220 589 06 43 00
Press out angular contact ball bearing
Component Identification
1
Detach retaining ring from wheel carrier (2).
2
Position wheel carrier (2), drift (01), pressure plate (03) and extraction/insertion sleeve (02) from extraction and insertion tool 140 589 08 43 00
on workshop press.
Use suitable horizontal base for support during pressing procedure.
3
Press out wheel bearing (1) by operating workshop press.
Press in angular contact ball bearing