S 65 AMG (221.179) V12-6.0L Turbo (275.982) (2008)
Special Tools
Repair Materials
AH67.20-P-2000-01SX Notes on Removing and Installing Rear Window
AH67.20-P-2000-01SX Notes On Removing And Installing Rear Window
Allow primer to air dry for 10 min to avoid negative effects to the adhesive action of the glue.
Open window in driver door. This prevents the rear window from being pressed outwards by the air pressure when a door is closed before the bond has
completely cured.
After applying glue, install the rear window within 10 min before the adhesion force of the glue decreases.
AH67.20-P-2000-01T Notes on Remove/Install Rear Window
AH67.20-P-2000-01T Notes On Remove/Install Rear Window
^
Mask areas around rear window with suitable textile adhesive tape to prevent damaging the vehicle paintwork when cutting out.
^
Allow primer to air dry for 10 min. to avoid negative effects to the adhesive action of the glue.
^
Model 203.0/2: Cut silicon semiconductors for ground connection and replace when installing. Use new clips when installing water repellent.
^
The side window in the driver door must be opened during the curing time to prevent the rear window from being pressed out by the air when the
doors are closed.
^
Install rear window on body flange within 10 minutes before adhesive force of glue starts to decrease.