S 65 AMG (221.179) V12-6.0L Turbo (275.982) (2008)
/v12-6.0l_turbo_(275.982)/Page-3903002.png)
6. Mask off surface zone of upper glass layer on windshield (1) with adhesive tape (2) and carefully break by tapping with hammer.
7. Remove broken surface zone of upper glass layer by pulling off adhesive tape (2). Break out any glass splinters remaining and suction off.
Wet/dry vacuum cleaner
8. Cut through second adhesive bead (support bead) on side of A-pillars and at top, at front edge of roof.
Cutting blade, shape L, blade length 19 mm
9. Position cup suction tool in upper third of windshield (1) and lift windshield (1) away from body flange.
Cup suction tool, suction lifting device
Aid of helper required for guiding windshield (1), otherwise adjacent body parts could be damaged.
Detach windshield (1) from body flange in upper area first, then pry out upward.
