SL 500 (129.067) V8-5.0L (119.982) (1996)
Top compartment cover (1)
place with upper side on a suitable base.
Nut (2) on underside of top compartment cover
unscrew and remove together with rubber base (19 pieces).
Cover strip (3)
remove.
Retaining clips (5)
press off forwards (2 pieces).
Plastics clips (4)
unlock and remove (4 pieces).
Covering (6) on front surround
detach left and right with plastic wedge (arrows).
Covering (6)
lift out of front plug-in fold by using a bodkin.
Top compartment cover (1)
place on underside.
Rear covering (6)
unhook out of pressed clips and remove covering (6).
Top compartment cover (1)
place with upper side on the spread out covering (6) (underside points upwards) and align. Observe installation instructions.
Covering (6) with cardboard strips sewn in into the front plug-in fold on top box lid (1)
put and fix with plastic clips (5).
Top compartment cover (1)
place on underside and hook covering under pressed clip without any creases, with wire at rear of top compartment cover.
Covering (6) left and right, front
fit and stick onto surround. Use MB universal adhesive Part Number 000 989 82 71.
Further installation
in reverse sequence
Installation note
When renewing the top compartment cover, following additional work must be carried out before assembling the covering: