SL 500 (129.068) V8-5.0L (113.961) (2000)
Component Identification, Part 3
Component Identification, Part 4
5
Turn the clamping nut (80) anti-clockwise against the force of the torsion spring until the lower steering shaft (80a) can be pushed on.
NOTE: The lug (arrow) on the upper thrust ring (reset cam for the combination switch) and the milled recess (arrow) for the fixing bolt of the
steering coupling on the lower steering shaft must be in the same position.
Component Identification, Part 5
6
Push lower steering shaft (80a) onto the splines of the upper steering shaft (70g) until the locking ring (80d) can be inserted between the flange of
the steering coupling and the flexible disk in the groove of the upper steering shaft (70g).