mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

BT35.31-P-0012-01C Radial Sealing Ring and Joint Flange on Drive Pinion Modified|Page 5433 > < Fluid - Differential|Capacity Specifications|Page 5428
Page 1
background image

Seals and Gaskets: Service and Repair
BT35.31-P-0012-01C Radial Sealing Ring and Joint Flange on Drive Pinion Modified

BT35.31-P-0012-01C Radial sealing ring and joint flange on drive pinion modified

- Rear axle center assembly dia. 198 [models 170.465 /466, 202.033, 203.064/264, 208.365/370/465/470, 210.065/08/265/28]
- Rear axle center assembly dia. 210 [models 129.068/076, 208.374, 210.270/274, 215.375 /378, 220.170/175/178, 230.475]
- Rear axle center assembly dia. 210E

A new radial sealing ring and a new joint flange with protection ring were phased in as of 15.01.02.

This improves the sealing at the drive pinion against dirt from outside.

If repair work means that one of the two components (new joint flange or new radial sealing ring) is replaced for the first time, then both must be
replaced together.

Only then is correct sealing guaranteed.

Version as of 01.04.98 up to 14.01.02

Shown on rear axle center assembly dia. 185 mm

Version as of 15.01.02 with double labyrinth seal

BT35.31-P-0012-01C Radial Sealing Ring and Joint Flange on Drive Pinion Modified|Page 5433 > < Fluid - Differential|Capacity Specifications|Page 5428