SL 500 (230.475) V8-5.0L (113.963) (2004)
/v8-5.0l_(113.963)/Page-4074023.png)
GF82.95-P-4100-02RM TELE AID Control Unit, Task
GF82.95-P-4100-02RM TELE AID Control Unit, Task
- with CODE (359) TELE AID emergency call system
The emergency call system control unit (N123/4) has the following features and tasks:
^
Integral telephone module for emergency call, MB-Info call and roadside assistance call
^
Autonomous position detection
^
Detection and storage of vehicle-specific data (e.g. circuit status)
^
Actuation of the telephone antenna (A2/22) or the TELE AID backup antenna (A2/50)
^
Voice output over the left front emergency call speaker (H4/46) and right front emergency call speaker (H4/47)
^
Read in of crash data from the restraint systems control unit (N2/7) over a discrete line
^
Unlocking the vehicle in an emergency (i.e. after a crash)
^
Read in the status of the SOS pushbutton switch (S93/3) and the MB-Info and breakdown assistance button group (S93/6) via 2 discrete lines
^
Receiving satellite data over the GPS antenna (A2/23)
^
Creating an SMS and keeping it ready to send
^
Muting other audio signals (e.g. radio, navigation)
GF82.95-P-4100-04RM TELE AID Control Unit, Function
GF82.95-P-4100-04RM TELE AID Control Unit, Function
- with CODE (359) TELE AID emergency call system
The emergency call system control unit (N123/4) uses its own microprocessor. The microprocessor is divided into two main areas, the telephone module
and the navigation module. The emergency call system control unit (N123/4) is the central processor of all important data for a Telematic Alarm
Identification on Demand (emergency call system) (TELE AID) emergency call. With the aid of the integrated navigation module, the emergency call
system control unit (N123/4) calculates the vehicle position, and in the event of emergency call it generates the emergency call telegram in the form of an
SMS.
The crash data are received by the restraint systems control unit (N2/7) over a serial interface.
The emergency call system control unit (N123/4) can be diagnosed through the central gateway control unit (N93) with STAR DIAGNOSIS via a
diagnosis bus.
GF82.95-P-4100RM TELE AID Control Unit, Location/Task/Design/Function
GF82.95-P-4100RM TELE AID Control Unit, Location/task/design/function
- with CODE (359) TELE AID emergency call system
