mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

TV Tuner, Location/Task/Design|Page 18232 > < TV Tuner, Location/Task/Design|Page 18230
Page 6
background image

GF82.85-P-2011RIJ TV-Mode, Function

GF82.85-P-2011RIJ TV-mode, Function

- with CODE (527) COMAND APS with single DVD drive (with navigation)
- with CODE (865) TV tuner
- Digital Japan

Function requirements

^

"Circuit 15 ON" status

^

COMAND operating, display and controller unit (A40/3) activated via "ON" button

^

"TV" menu selected

^

TV-antenna signals available

^

TV antennas and antenna amplifier modules must be installed

General

The digital TV tuner (A90/3) makes it possible to receive digital television channels in the vehicle and watch them on the display on the COMAND
controller unit. In the process, the TV digital tuner separates the video and audio signals from each another.

The TV mode is therefore comprised as follows:

^

Function sequence, TV signal reception

^

Function sequence, video signal

^

Function sequence, audio signal

^

Supplemental information

The TV picture is switched off as from a speed of 5 km/h. When the vehicle is moving, only acoustic playback remains active and - for safety reasons - a
warning is shown on the COMAND controller unit display.

Operating instructions

The TV functions can be selected, activated and set with the control keys on the COMAND controller unit.

Function sequence, TV signal reception

-

TV 1 and 2 antenna
-

Left antenna amplifier module (A2/64)

-

TV 3 and 4 antenna
-

Right antenna amplifier module (A2/65)

-

Direct line

-

Digital TV tuner

-

Media Oriented System Transport (MOST)

-

COMAND controller unit

TV Tuner, Location/Task/Design|Page 18232 > < TV Tuner, Location/Task/Design|Page 18230