SL 500 (230.475) V8-5.0L (113.963) (2004)
Navigation Module: Customer Interest
COMAND(R) System - System Starts Then Switches OFF
COMAND APS: SYSTEM STARTS AS FAR AS THE STAR DISPLAY AND THEN GOES OFF, NAVIGATION NOT AVAILABLE, DRIVE
ERROR
Topic number
LI82.85-P-048091
Version
2
Design group
82.85 Navigation and communication systems (CNS, ICS, COMAND, FleetBoard)
Date
10-28-2009
Validity
Model 171, 230, 164, 251, 169, 245, 211, 219, 203.7 with COMAND (code 512 or 527) and code 809 or 800 (NTG2.5)
Model 463 with SA code EU1
Reason for change
Complaint revised
Reason for block
Complaint:
1. The COMAND (A40/3) starts only until the star appears and then switches off again.
2. The message "Navigation unavailable" appears in the navigation basic menu.
3. The message "Drive unavailable, temperature too low or too high" appears in the navigation basic menu.
4. The COMAND (A40/3) does not power ON
5. Fault message in the display "Error on Update - Error code 0x....".
6. Audio CDs or video DVDs are not read, drawn in or ejected.
Attachments
Cause:
There is a hardware fault in the Comand (A40/3).
Remedy:
Replace COMAND APS (A40/3). Before replacement, please look at the notes below.
NOTE:
For fault number 3 above, ensure that the replacement head unit serial number is newer than what is listed below.
211/219 COMAND with HDD/Navi --------------90233487
171 COMAND with HDD/Navi --------------81202465
245 COMAND with HDD/Navi --------------81200442
164 COMAND with HDD/Navi --------------90341695
251 COMAND with HDD/Navi --------------90205119