SL 500 (230.475) V8-5.0L (113.963) (2004)
Rear Subframe Mount: Service and Repair
AR35.10-P-0040-03R Remove/Install Rear Rubber Mount In Rear Axle Mount
AR35.10-P-0040-03R Remove/install rear rubber mount in rear axle mount
- except CODE (P99) Special model "AMG Black Series" [model 230]
Modification notes
Special Tools
Repair materials
Component Identification
Removing
Always replace rear rubber bushings (1b) in pairs.
1
Fit thrust piece (01h) on rubber mount (1b).
The bumps of the rubber mount (1b) must be seated in the recesses of the thrust piece (01h).
2
Fit bracket (01i) on rear axle carrier.
3
Pull the rubber bushing (1b) out of the rear axle carrier by screwing in the spindle (01m).