SL 500 (230.475) V8-5.0L (113.963) (2004)
-
Collision prevention of
Cushion shell/seat adjuster
Center console/seat cushion
B-pillar/backrest
Roof/head restraint
-
Calibration
Longitudinal adjustment (V2)
Inclination adjustment (NV)
Height adjustment (HV)
Seat cushion depth adjustment (SK)
Backrest adjustment (L)
Head restraint adjustment (K)
-
Contacts:
Left front multicontour backrest control module (N32/16)
-
Reading in of switches, sensors:
Right front seat belt buckle restraint systems switch (S68/4) (only (USA))
Vehicle-sensitive seat belt lock sensor (A60)
Right rear passenger compartment access switch (S137/1)
Front passenger seat occupied and automatic child seat recognition sensor (B48)
Consumer control:
-
Right front seat cushion ventilation motor group (M18/11)
-
Right front backrest ventilation motor group (M18/12)
-
Right front seat adjustment motor group with memory (M28)
-
Heated seats:
-
Right front seat cushion heater element (R13/3)
-
Right front backrest seat cushion heater element (R13/4)
Storing positions
Storage occurs in the right front seat adjustment control module with memory (N32/2).
The right front seat control module with memory (N32/2) is linked to the other control modules via the interior CAN.
GF91.25-P-2101-02R Multicontour Seat Control Module, Task
GF91.25-P-2101-02R Multicontour Seat Control Module, Task
- with CODE (404) Driver seat multicontour backrest
- with CODE (405) Front passenger seat multicontour backrest up to Model Year 8
Tasks of the multicontour seat control module are:
^
filling and emptying air in the multicontour backrest according to the requirements input by the multicontour backrest switch
^
controlling the dynamic lumbar support (function), triggered by the multicontour backrest switch
^
acquiring actual pressure values for the air cushions by piezo-resistive pressure sensors
^
creating status data logs on the cushion filling operations and sending these logs to the respective seat control module via a bi-directional, serial
communication interface.
in conjunction with the memory feature :
^
Communication via the interface to the corresponding control module, in particular for storing and calling up stored seat positions,
^
Adjusting stored seat positions (pressure values) and the other adjustments when calling up the memory feature.
GF91.25-P-2102R Multicontour Seat Control Module, Location/Task/Design
GF91.25-P-2102R Multicontour Seat Control Module, Location/Task/Design
- with CODE (404) Driver seat multicontour backrest
- with CODE (405) Front passenger seat multicontour backrest up to Model Year 8