SL 500 (230.475) V8-5.0L (113.963) (2004)
6. Separate side flap from mounting plate.
7. Remove toothed rack (Figure 4, 2) from mounting plate (Figure 4, 1) and disconnect mounting plate from Bowden cable (Figure 4, 3)
8. Attach new mounting plate to Bowden cable. Make sure the new mounting plate is installed flush/flat relative to the slot of the adjusting nut
(Figure 5). To install, lubricate the taper of the adjusting nut with grease.
9. Insert toothed rack into mounting plate (Figure 4).
10. Connect side flap to mounting plate (Figure. 6).