SL 500 (230.475) V8-5.0L (113.963) (2004)
18.
Install clamp-on mounting bracket (B, Figure 19):
^
Position mounting bracket (B) onto SBC hydraulic unit (A) as shown in Figure 19.
Note:
^
Ensure mounting bracket (B) is flush with SBC hydraulic unit (A).
^
Torque mounting clamp screw to 5 Nm while pressing bracket (B) onto SBC unit (A).
19.
Insert a cable tie through slots (arrows, Figure 17) in bracket, do not close cable tie.
Note:
Cable tie installation shown on "bolt-on" type mounting bracket, cable tie installation for clamp-on type bracket is similar.