SL 500 (230.475) V8-5.0L (113.963) (2004)
24.
Install clamp-on mounting bracket (B, Figure 21) if necessary due to broken self-tapping screw:
^
Position mounting bracket (B) onto SBC hydraulic unit (A) as shown in Figure 21.
Note:
Ensure mounting bracket (B) is flush with SBC hydraulic unit (A).
^
Torque mounting clamp screw (C) to 5 Nm while pressing bracket (B) onto SBC unit (A) (proceed to step 27).
25.
Install new SBC hydraulic unit (B, Figure 22) into SBC body mounting grommets.
26.
Connect hydraulic lines and SBC suction hose (A, Figure 22) to SBC hydraulic unit (B); refer also to WIS: AR42.46-P-0010R steps 15-21.