SL 500 (230.475) V8-5.0L (113.963) (2004)
15) using a small screwdriver.
14.
Remove SBC ground wires (arrows, Figure 17) from SBC harness connector (A):
^
Unpin SBC ground wire connectors (position 37 and 44) using cable release (Special Tools: W 000 589 13 99 30 and W 220 589 01 99 50)
and remove ground wires (arrows) from SBC connector housing (A).
^
Discard old ground wire harness, it is no longer needed.
15.
Insert the new ground wire harness (arrows Figure 17) into the SBC connector housing (A):
^
Insert longer ground wire into position 44.
^
Insert shorter ground wire into position 37.
Note:
Ensure ground wire connectors are properly locked into place.