SL 500 (230.475) V8-5.0L (113.963) (2004)
^
Torque mounting clamp screw (C) to 5 Nm while pressing bracket (B) onto SBC unit (A) (Proceed to step 24).
22.
Install new SBC hydraulic unit into SBC body mounting grommets.
23.
Connect hydraulic lines to SBC unit; refer also to WIS AR42.46-P-0010R steps 15-21.
24.
Connect SBC suction hose (A, Figure 24) to SBC hydraulic unit fitting (B); refer also to WIS: AR42.46-P-0010R steps 15-21.
Note:
Ensure new hose clamp (arrow) is installed.
25.
Secure new SBC suction hose (A, Figure 25) to SBC hydraulic unit mounting bracket (B) using new ("omega" type) mounting clips (arrows).