SL 500 (230.475) V8-5.0L (113.963) (2004)
6
Cool the rocker arm spindle (3)
7
Place heated camshaft bearing bridge on board (4)
8
Install rocker arm spindle (3)
CAUTION: Insert the rocker arm spindle (3) in the camshaft bearing bridge by gently tapping with a hammer and simultaneously
remove the guide shaft. Ensure that the rocker arms do not get jammed.
9
Align the rocker arm spindle (3)
-
In order to align and secure the rocker arm spindle (3), insert two mounting screws for the camshaft bearing bridge through the mounting bores
in the camshaft bearing bridge.
NOTE: Oil supply bores of the rocker arm spindle (3) point downwards (direction of the cylinder head).
10
Install camshaft bearing bridge
NOTE: Pay attention to tightening diagram.