SL 500 (230.475) V8-5.0L (113.963) (2004)
Component Identification
1
Place cylinder head onto the supports (1 pair) (1).
Align the supports so that the reaming tool is not able to strike the supports when it is pressed through.
Component Identification
2
Insert reaming tool (2) into the basic bore.
3
Press reaming tool (2) through. and lubricate with kerosene. Clean broach (2) after every reaming with compressed air or cylinder brush. Use a
matching aluminum drift as an extension in the area of the guide sleeve (3) for pressing through the reaming tool (2).
AR05.30-P-3831-03VT Inspection and Machining Dimensions of Valve Seat Rings
AR05.30-P-3831-03VT Inspection and machining dimensions of valve seat rings