SL 500 (230.475) V8-5.0L (113.963) (2004)
Oil Pan: Removal and Replacement
AR01.45-P-7500R Remove/Install Oil Pan
Remove/Install Oil Pan
DANGER:
-
Risk of death. Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer.
1
Remove oil pan bottom section (1)
2
Remove top part of oil pan (2)
NOTE: Installation:
-
Observe different bolt lengths and bolt diameters!
-
Clean sealing surfaces, apply sealing compound to the sealing surfaces in the form of a bead with a height and width of 2.0 mm ± 0.5 mm! The
sealant must be applied within 10 minutes. The silicone bead must not be spread.
3
Install in the reverse order.
DANGER:
-
Risk of accident. Accidents may result if the vehicle starts off unintentionally with the engine running. Risk of injury as working
around the engine during start-up or while running may result in contusions and burns.
-
Secure vehicle to prevent it from moving.
-
Wear closed and snug-fitting work clothes.
-
Do not grasp hot or rotating parts.
4
Run engine and inspect for leaks.
AR01.45-P-7555R Remove/Install Bottom Part of Oil Pan
Remove/Install Bottom Part Of Oil Pan