SL 500 (230.475) V8-5.0L (113.963) (2004)
Air Flow Meter/Sensor: Service and Repair
Removing, Installing Hot Film Mass Air Flow Sensor With Air Intake Pipe
Removal, installation
1
Remove cover at engine front face
2
Remove air filter with intake pipes
3
Disconnect electrical connector from hot film mass air flow sensor (B2/5)
4
Disconnect crankcase vent hose (1/2) from air intake pipe (2/2)
5
Press down lug (arrow) at air intake pipe (2/2) with a screw driver
6
Remove hot-film mass air flow sensor (B2/5) with air intake pipe (2/2)
CAUTION: Before removing the air intake pipes (2/2), disconnect cable (arrow) of electronic accelerator actuator.
7
Install in reverse sequence