SL 500 (230.475) V8-5.0L (113.963) (2004)
Seat Occupant Classification Module - Air Bag: All Technical Service Bulletins
Restraints - SRS Warning Lamp ON
Date: March 31, 2009
Order No.: P-B-91.60/189
Supersedes:
Group: 91
SUBJECT:
Model 230.470/471/472/474/475/476/477/479, as of VIN F136085
Equipped with Weight Sensing System, Code 494 (USA) SRS Warning in Instrument Cluster On
If you receive customer reports in the above model vehicles that there is a SRS warning in the instrument cluster, this may be due to the WSS control unit
connection being loose or unplugged. If the seat is set to a very low position, the connector may contact with the cover of the cable duct under the seat.
To remedy this condition, follow the instructions below.
1. Remove front passenger seat. Refer to WIS document AR91.10-P-1000R.
2. Install a new cable cover with modified contour (Figure 1).
3. Reconnect the connector.
4. Secure connector with cable tie as shown in Figure 2.
Note:
The position of the cable tie must exactly match the position shown in Figure 2.
5. Check cable tie for tight seating in order to rule out any subsequent twisting.