SL 500 (230.475) V8-5.0L (113.963) (2004)
Parking Assist Distance Sensor: Service and Repair
AZ54.65-P-0001-03R Install Sensors and Connect
AZ54.65-P-0001-03R Install Sensors And Connect
1. Clip enclosed rubbing strip (10) with integrated ultrasonic sensors (3) into removed rear bumper.
2. Remove present grommet (see arrow in left figure) for wiring harness passage of ultrasonic sensors (3) below left taillamp.
3. Insert ultrasonic sensor (1a) wiring harness into present cable passage (see arrows) as shown in figure, whereby the 8-pin connector of the plug
connection (X35/28) is positioned on the left inner side of the bumper.
4. Connect 5-pin connector to ultrasonic sensor (3) (see magnified section).
5. Route 8-pin connector of plug connection (X35/28) through wiring harness passage on left rear of vehicle and seal with grommet (i).