SL 500 (230.475) V8-5.0L (113.963) (2004)
Evaporator Temperature Sensor / Switch: Service and Repair
AR83.30-P-8085R Remove/Install Evaporator Temperature Sensor
1.1 Switch off ignition and withdraw key from electronic ignition switch (EIS)
1.2 Switch off engine, remove Keyless Go card from vehicle
NOTE: For CODE (889) Keyless Go Keep Keyless Go card out of transmission range.
2
Remove cover below left of instrument panel
3
Detach electrical connector at evaporator temperature sensor (B10/6)
4
Remove evaporator temperature sensor (B10/6)
5
Install in the reverse order.