SL 500 (230.475) V8-5.0L (113.963) (2004)
Models 211, 215, 220, 230 Shown On Model 220, Left Side
1
Check rubber boot (7f) on supporting joint for leakage and condition.
CAUTION: If the rubber boot (7f) is leaking:
-
Install new supporting joint (7) or lower transverse control arm (4):
-
Install new supporting joint (7)
-
Install new lower transverse control arm (4)
2
Check rubber boot (18f) on ball joint of torque strut (18) for leakage and condition.
CAUTION: If the rubber boot (18f) is leaking: Install new torque strut (18).
3
Check rubber boot on follower joint for leakage and condition.
CAUTION: If rubber boot is leaking (e.g. grease flowing out): Replace upper transverse control arm.
4
Check follower joint for play
CAUTION: If there is play in the follower joint: Replace upper transverse control arm.