SL 500 (230.475) V8-5.0L (113.963) (2004)
Fluid - A/T: Service and Repair
AR27.00-P-0101A Inspect Oil Level In Transmission, Add Oil if Necessary
Inspect oil level in automatic transmission, add oil if necessary
Adding transmission oil
Danger:
-
Risk of accident. Accidents may result if the vehicle starts off unintentionally with the engine running. Risk of injury as working around
the engine during start-up or while running may result in confusions and burns
-
Secure vehicle to prevent it from moving.
-
Wear closed and snug-fitting work clothes.
-
Do not grasp hot or rotating parts.
NOTE: The vehicle must be horizontal
1
Remove locking pin (93a)
NOTE: To do this, shear off the plate of the locking pin with a suitable tool and press down the rest of the pin in the cap.
2
Take off cap (93)
3
Fill with transmission oil
CAUTION: When refilling and after changing the oil, pour in approx. 5 L of transmission oil before starting the engine. Insufficient and
excessive quantities of oil result in malfunctions and transmission damage.
4
Start engine and allow to idle in selector lever position" P"
NOTE: When refilling, refill with the rest of the specified oil quantity.
5
Shift through the driving stages several times with the vehicle stationary and the engine idling
NOTE: Operate service brakes at the same time
6
Check transmission oil temperature
NOTE:
-
Operate service brakes at the same time. When the transmission is cold, the oil level indicator must be between the "min." and "max." marks,
25 degree C (transmission oil temperature). The exact oil level at 80 degree C (transmission oil temperature) must be between the "min." and
"max." markings.
-
When using the HHT or STAR DIAGNOSIS, the current transmission oil temperature must be read out in one of the selector lever positions R,