SL 500 (230.475) V8-5.0L (113.963) (2004)
6
Unscrew bolts (41)
-
Model 230
7
Unscrew hexagon socket bolts (40)
NOTE: Model 230: Use hexagon socket wrench with ball head.
8
Disconnect electric couplings at electronic selector lever module (N15/5)
9
Release ignition lock cable (1) at connection fitting of ignition lock cable (2)
-
Raise locking catch (1b) and push connector (1c) against force of spring into electronic selector lever module (N15/5), turn 90 degrees to the
left or right and pull off ignition lock cable (1).
10
Take out electronic selector lever module (N15/5)
NOTE: Model 230: Raise center console at rear.
CAUTION: Installation: Do not jam any electric cables in between.
11
Install in the reverse order
NOTE: After installing, erase fault codes with STAR DIAGNOSIS.
12
Perform function check
-
If result is negative: Set shift rod.
AR27.60-P-0901RA Remove/Install Electronic Selector Lever Module (ESM)
AR27.60-P-0901RA Remove/Install Electronic Selector Lever Module (ESM)
- Transmission 722.9