mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Body - Water Leak From Bottom of Rear Window|Page 22341 > < GF72.29-P-4112R Driver-Side Power Window Switch Group, Location / Purpose / Design / Function|Page 22331
Page 1
background image

Back Window Glass: All Technical Service Bulletins
Body - Water Leak From Bottom of Rear Window

Date: February 26, 2007
Order No.: P-B-77.30/50a
Supersedes: P-B-77.30/50 dated January 30, 2007
Group: 77

Revision History

Revision

Date

Purpose

a

2/26/07

Warranty Information (Op Code) Corrected

-

01/07/06

Initial issue

SUBJECT:
Model 230.474/475/476/479

Water Ingress in Area Below Bottom Rear Window Seal

If you receive customer reports in the above model vehicles regarding water ingress in the area below the bottom rear window seal (Figure 1, arrow), this
may be due to the seal coming loose (Figure 2) from the rear window. A new seal with a new part number is now available which omits the self adhesive
feature of the previous seal. To resolve, perform the following.

1. Protect the trunk in the repair area to prevent soiling the trunk panels.
2. Move Vario Roof to intermediate or repair position. With the ignition switch left on, the roof will remain in this position for approximately 15

minutes before moving. A chime will sound as an alert that the roof will soon start to move. Cycling the key will allow the roof to remain in this
position for approximately an additional 15 minutes.

3. Remove nuts at bottom of rear window frame.

Body - Water Leak From Bottom of Rear Window|Page 22341 > < GF72.29-P-4112R Driver-Side Power Window Switch Group, Location / Purpose / Design / Function|Page 22331