SL 500 (230.475) V8-5.0L (113.963) (2004)
Bend the nozzle of the cartridge (Figure 11).
a).
Insert a wire of 2 to 3 mm in diameter into the nozzle to ensure that the cone point remains open while bending the nozzle.
b).
Carefully heat the nozzle using a hot air blower.
c).
Bend the cone point of the nozzle using pliers.
Use sealant gun and window sealant for dabbing (3-Figure 12).
5.
Reinstall in opposite order.
6.
Perform leakage test.
Cause 2:
Rail of Vario roof to Vario roof leaky.
Procedure:
Seal seal.
Water ingress between inner headliner and Vario roof seal (Figure 13).
1.
Remove rail from side of Vario roof, seal (A-Figure 13, shown previously) (See WIS-doc AR77.50-P-4200R).
2.
Perform leakage test.
V. Water Leak In Area of Upper Rear Side Window.
V.
Penetration by water into upper rear side window area
Cause 1:
Rear side window adjustment incorrect.
Procedure:
Check adjustment, if necessary adjust higher.