SL 500 (230.475) V8-5.0L (113.963) (2004)
Retaining plate (B-Figure 18) for upper side rear window seal to rear window frame leaky (screw holes).
Procedure:
Plug screw holes.
1.
Perform rain test.
2.
Move Vario roof to intermediate position and secure (See WIS-document AR77.50-P-3000-01R).
Use Special Tool "Support".
3.
Remove retaining plate (B-Figure 18).
4.
Plug screw holes. Use MB universal sealant.
5.
Reinstall in opposite order.
6.
Perform leakage test.
Cause 3:
Routing of electric cables incorrect at pivot point, wedge (A-Figure 20, magnified section) of upper rear window sealing does not hit in funnel
(B-Figure 20, magnified section) C-pillar sealing, funnel (B-Figure 20, magnified section) deformed.
Procedure:
Check cable routing, apply lubricant to bottom of wedge (A-Figure 20, magnified section), glue on funnel (B-Figure 20, magnified section).